How can I access

How can I access

You’ll need a phone or a computer to access To manage your wifi extender and alter settings like the WiFi password, firmware update, and reset procedure, go to the configuration page. We’ll go over all the advice and methods in this article for resolving any issues you could run into when trying to access the Wavlink setup page.

Wavlink Extender setup via

  1. Start by turning on your extender.
  2. Put the extender near the router.
  3. Watch for a solid green LED light.
  4. To begin, use any smart device.
  5. In the WiFi device’s settings menu, choose the WIFI option.
  6. Connect to the EXT Wavlink extender after setup.
  7. To begin, go to
  8. It should now be possible to see the new extender setup page.

This is a blog article about snake eyes piercing – the pros and cons of each piercing, and how long it takes to heal. It discusses the different types of piercings available, the jewelry, and how to care for your piercing.

wavlink extender setup via WPS button?

The WPS button makes growing your host network simpler.

  • Before starting the instructions, make sure your wireless router is compatible with WPS.
  • Press the WPS buttons on your host router and extender in under two minutes.
  • A successful WPS connection is indicated by the Signal LED turning solid blue, so keep an eye out for that.
  • Now that everything is complete, the WI-FI repeater will automatically find the signal.
  • Enjoy. Both of the extended networks’ SSIDs (network names) and passwords are the same as those of your host networks.

How to reset your wavlink extender step by step:

  •  connect your extender.
  • The paper clip or pin can be used to reset your extender.
  • For 8 to 10 seconds, maintain the position.
  • When your Wavlink repeater restarts, wait.
  • When it’s done, all of the lights will be a solid green colour.
  • Some lights have automatic shut-off after a brief period.
  • That indicates that the reset of your booster was successful.

Procedures for troubleshooting

  1. Place the wavlink extender close to the router.
  2. You’ll need a laptop, desktop, or smartphone to access the page.
  3. A page called is only accessible locally.
  4. You must be connected to the repeater in order to view the address.
  5. Make that the power light on the extender is stable.